What are the steps to install the toilet drain?
Installation method -- make all kinds of preparations before
installation of the toilet, especially the key points of
installation must be achieved, so as to ensure the smooth
installation.
1. Same as above installation key points 1, 2.
2. Fixed seat urinal (one of the fixation methods is selected
according to the fixation method of the urinal) method 1: pull-out
bolt fixation method, which is designed for the urinal with
mounting holes at the bottom.Toilet on the location of the
installation, use a pencil to draw the need to the position of the
mounting holes in the ground at the bottom of the hole location and
contour, and then remove the toilet, in marked the location of the
hole and insert the explosive bolts, in sit implement discharge
outlet joint coating adhesive, with the ground will implement
smoothly away, strong explosive bolts, and the last bottom sealing
implement with cement mortar.Method 2: cement bonding method, this
method is aimed at the bottom of no installation hole design of the
toilet seat.Toilet on the location of the installation, use the
pencil out of the toilet bottom contour, along the contour line to
laying a circle within a 30 mm wide, 15 mm high cement mortar,
present implement discharge outlet with the ground joint coating
adhesive, wipe clean implement foot, smoothly in its installation
position, make strong the binding, wipe clean overflow of cement
mortar.
3. After fixing the toilet, immediately wipe the extra cement on
the toilet and the ground.
4. Connect the toilet cistern and the water pipe.
5. Check whether the water tank is leaking, and then flush to check
whether the sewage pipe is free.
6. It shall not be used for three days after installation, and it
shall not be used for at least one day at the present cementing
speed, so as not to affect its stability.
| Name: | Toilet connector pipe |
| Type: | E232-1 |
| Brand: | San-Tide |
| Origin: | Chian xiamen |
| Material: | PVC |
| Type: | Plumbing Traps |
| Color: | White |
| length: | Can be cut |
| Application: | W.C Pan |
| Specification: | choosable |
| Processing method : | Assembly production |
| USES: | Toilet drainage |
| Specifications: | The question mark tube |
| Foreign trade: | is |
What is the method that toilet blow-down tube changes?
1. The installation of sewage pipe should be taken before the
toilet to conduct a comprehensive inspection, look at whether there
is mud, sand, waste paper and other debris inside the pipe
blockage, at the same time check whether around the toilet before
and after installing a ground level, such as to find the ground,
when installation should be leveling the ground.
2. Turn over the toilet, determine the center on the toilet drain,
and draw the cross center line, which should extend to the feet
around the bottom of the toilet.
3. Align the cross line on the toilet with the ground sewage
outlet, keep the toilet installed horizontally, press the sealing
ring tightly, install the ground screw and decorative cap.
4. Flush the pipe with water for 3-5 minutes to ensure the clean of
the water pipe;Install Angle valve and connect hose, then connect
hose to water inlet valve of water tank fitting and press water
supply.
