In the toilet when decorating, the right of choose and buy
closestool is a very important matters, and complexity is a, if the
toilet bowl to keep mouth and toilet size, but more trouble, and
are likely to use the toilet shifter.Today we're going to look at
the toilet shifter, and what are the specifications and usage
points of the toilet shifter.
What about the toilet shifter?
1. The toilet shifter is a kind of pipe fitting, which is a device
that can change the position of the water port under the surface
when the water port under the floor and the water outlet at the
bottom of the toilet are not suitable.If the bathroom wall and
drainage apertures already had been fixed, and buy the drainage
pipe mouth of the outlet of the toilet and bathroom can't butt will
use this kind of pipe fitting, only use the pipe to make the two
docking.
2. The toilet shifter can not only change the position before and
after the water inlet on the floor, but also change the position of
the left and right sides of the water.If can't find this small wall
is apart from the toilet, can be used shifter forward out of 5 cm,
and next to the toilet is the head of the water, such as pillars in
big package, implement too crowded or not fit, also use shifter
regulation about location.
3, after using the toilet shifter, the toilet will be clogging up
than before, and curve will more than before discharge pipes, pipe
pressure will increase, it is easy to cause the reverse flow of
polluted water, and toilet flush function can not fully play out,
so unless necessary, try not to install a toilet shifter, if had to
install a toilet shifter, connected by the distance is not too
long.
4. The larger the displacement of the toilet shifter, the larger
the slope.So before install shifter to stick floor tile, plane down
to the ground or mat high ground, the ground raise, the toilet will
have improved and elevated toilet side needs to affix ceramic tile
to beautify.
| Name: | The toilet connects the shifter. |
| Type: | S-103-2 |
| Brand: | San-Tide |
| Origin: | Chian xiamen |
| Product category: | Toilet shifter |
| Usage: | On line type |
| Structure: | even |
| Flushing mode: | Strong fall type |
| Flush key: | Go up and down. |
| USES: | The drain |
| Specifications: | optional |
| Color: | white |
| Performance: | The toilet shift |
The toilet shifter is installed.
But in the daily life, because decorate, toilet needs to shift to
things, so, have to know the specific circumstances, toilet shifter
installation to ensure that does not affect the toilet decorate and
does not affect the daily for using the toilet.In today's building
materials market, usually the size of the toilet shifter is a
standard size, if improperly installed, unable to connect to, lead
to upper and lower interfaces and center could set a dangerous
precedent for later, a small obstacle to toilet and sewage pipeline
jam problem.So the toilet shifter are generally in the hole
distance is too long or too short to install, and usually shift
distance cannot be more than 10 mm, and must stick after floor tile
can be well on the toilet shifter for installation.
